FORGED STEEL BALL VALVES

CONSTRUCTION & FEATURES

  • Floating type Ball Valve
  • Designed to BS5351/BS EN 17292 ASME B16.34
  • Full Bore and Reduced Bore
  • Two Piece Threaded and Three Piece Bolted Body
  • Soft Seated as Standard with wide selection of materials dependant on service conditions
  • Bubble Tight Sealing Seat Design
  • Anti Blow Out Stem Design
  • Anti Static Feature
  • Locking Device Option for Manual Operated Valve
  • Firesafe Certified to API 607
  • Socket Weld ends to ASME B16.11
  • Extended Body for Socket welded end piece to prevent heat damage to soft seat during welding
  • Pup Piece Welding on ends available upon request
  • Threaded(NPT) ends to ASME B1.20.1

MAIN COMPONENT & PARTS

1. BODY:
Forged from high strength Carbon & Stainless Steel materials to give a robust component. In accordance with BS5351 / BS eN 17292 & aSMe B16.34

2. CONNECTOR:
Produced by Forging Process, and available in standard extended lengths to protect the valve seals during welding installation. available in Carbon & Stainless Steel Materials

3. BALL:
Single piece, Solid ball, to resist deformation under pressure. Produced in Stainless Steel grades as Standard.

4. STEM:
Produced from high Strength Stainless Steel with generous drive tang to fully engage with the ball for positive drive. engineered with the weakest point outside the pressure boundary for safety.

5. SEAT:
Produced from a range of thermoplastic Materials including RPTFE, DEVLON V & PEEK. the seats are carefully engineered to provide bubble tight shut off, whilst maintaining low operating torques.

6. GASKET:
Graphite, Optional PTFE on request

7. PACKING:
Graphite, Optional PTFE on request

8. LEVER:
Heavy Duty, and fitted with a plastic sleeve for operator safety. Incorporating padlock locating position.

9. NAME PLATE:
Permanently fixed, manufactured from Stainless Steel, to protect from environmental exposure.

CLASS 800#
FLOATING BALL VALVE

Threaded Ends, Full & Reduce Bore.

SPECIFICATION

Valve Body Pressure Rating
Class 800, Max 1975 psig @ 100 F (Carbon Steel)

Temperature Rating
As per ASME B16.34 dependant on Seat Material selection.
Please consult kVC Uk ltd.

Body
Two-piece construction.

Ball and Stem
316 Stainless Steel, Solid Ball as standard.
Other materials available.

Seats
RPTFE, DEVLON V & Peek.
Options are available.

Body Seal and Stem Packing
PTFE and Graphite packing as standard.
Other packings are available.

Operation
Valves are supplied with Lever operator.
Locking device or pneumatic and electric actuated.
Other options are available.

Seat / Seal Leakage
Conform to API 598.
All valves are tested to bubble-tight standards.

Design Specification
ASME 16.34
BS 5351 / BS EN 17292
Threaded ends to ASME B1.20.1
NACE MR-01-75 material (where required).
Firesafe to API 607 (where required).
Anti Static Feature.
Special materials are available to customer requirement.
End to end (L) dimensions are to manufacturer standard.

Note: Dimensions are for information only.
              Order Specific arrangement drawing dimensions will be final.

CLASS 1500#
FLOATING BALL VALVE

Threaded Ends, Full & Reduce Bore.

SPECIFICATION

Valve Body Pressure Rating
Class 1500, Max 3705 psig @ 100 F (Carbon Steel)

Temperature Rating
As per ASME B16.34 dependant on Seat Material selection.
Please consult kVC Uk ltd.

Body
Two-piece construction.

Ball and Stem
316 Stainless Steel, Solid Ball as standard.
Other materials available.

Seats
Devlon V, Peek
Other options are available.

Body Seal and Stem Packing
PTFE and Graphite packing as standard.
Other packings are available.

Operation
Valves are supplied with Lever operator.
Locking device or pneumatic and electric actuated.
Option are available.

Seat / Seal Leakage
Conform to API 598.
All valves are tested to bubble-tight standards.

Design Specification
ASME 16.34
BS 5351 / BS EN 17292
Threaded ends to ASME B1.20.1
NACE MR-01-75 material (where required).
Firesafe to API 607 (where required).
Anti Static Feature.
Special materials are available to customer requirement.
End to end (L) dimensions are to manufacturer standard.

Note: Dimensions are for information only.
              Order Specific arrangement drawing dimensions will be final.

CLASS 800#
FLOATING BALL VALVE

Threaded Ends, Full & Reduce Bore.

SPECIFICATION

Valve Body Pressure Rating
Class 800, Max 1975 psig @ 100 F (Carbon Steel)

Temperature Rating
As per ASME B16.34 dependant on Seat Material selection.
Please consult kVC Uk ltd.

Body
Two-piece construction.

Ball and Stem
316 Stainless Steel, Solid Ball as standard.
Other materials available.

Seats
RPTFE, DEVLON V & Peek.
Options are available.

Body Seal and Stem Packing
PTFE and Graphite packing as standard.
Other packings are available.

Operation
Valves are supplied with Lever operator.
Locking device or pneumatic and electric actuated.
Other options are available.

Seat / Seal Leakage
Conform to API 598.
All valves are tested to bubble-tight standards.

Design Specification
ASME 16.34
BS 5351 / BS EN 17292
Threaded ends to ASME B1.20.1
NACE MR-01-75 material (where required).
Firesafe to API 607 (where required).
Anti Static Feature.
Special materials are available to customer requirement.
End to end (L) dimensions are to manufacturer standard.

Note: Dimensions are for information only.
              Order Specific arrangement drawing dimensions will be final.

CLASS 800#
FLOATING BALL VALVE

Socket Weld Ends, Full & Reduce Bore.

SPECIFICATION

Valve Body Pressure Rating
Class 800, Max 1975 psig @ 100 F (Carbon Steel)

Temperature Rating
As per ASME B16.34 dependant on Seat Material selection.
Please consult kVC Uk ltd.

Body
Two-piece construction.

Body Bolts & Nuts
ASTM A193 Gr B7 or ASTM A194 Gr 2H
Other Bolts are available according to body material.

Ball and Stem
316 Stainless Steel, Solid Ball as standard.
Other materials available.

Seats
RPTFE, DEVLON V, Peek.
Options are available.

Body Seal and Stem Packing
PTFE and Graphite packing as standard.
Other packings are available.

Operation
Valves are supplied with Lever operator.
Locking device or pneumatic and electric actuated.
Other options are available.

Seat / Seal Leakage
Conform to API 598.
All valves are tested to bubble-tight standards.

Design Specification
ASME 16.34
BS 5351 / BS EN 17292
Socket Weld Ends to ASME B16.11
NACE MR-01-75 material (where required).
Firesafe to API 607 (where required).
Anti Static Feature.
Special materials are available to customer requirement.
End to end (L) dimensions are to manufacturer standard.

Note: Dimensions are for information only.
              Order Specific arrangement drawing dimensions will be final.

CLASS 1500#
FLOATING BALL VALVE

Threaded Ends, Full & Reduce Bore.

SPECIFICATION

Valve Body Pressure Rating
ASME Class 1500, Max 3705 psig @ 100 F (Carbon Steel)

Temperature Rating
As per ASME B16.34 dependant on Seat Material selection.
Please consult kVC Uk ltd.

Body
Two-piece construction.

Body Bolts & Nuts
ASTM A193 Gr B7 or ASTM A194 Gr 2H
Other Bolts are available according to body material.

Ball and Stem
316 Stainless Steel, Solid Ball as standard.
Other materials available.

Seats
Devlon V, Peek
Other options are available.

Body Seal and Stem Packing
PTFE and Graphite packing as standard.
Other packings are available.

Operation
Valves are supplied with Lever operator.
Locking device or pneumatic and electric actuated.
Option are available.

Seat / Seal Leakage
Conform to API 598.
All valves are tested to bubble-tight standards.

Design Specification
ASME 16.34
BS 5351 / BS EN 17292
Threaded Ends to ASME B1.20.1
NACE MR-01-75 material (where required).
Firesafe to API 607 (where required).
Anti Static Feature.
Special materials are available to customer requirement.
End to end (L) dimensions are to manufacturer standard.

Note: Dimensions are for information only.
              Order Specific arrangement drawing dimensions will be final.

CLASS 1500#
FLOATING BALL VALVE

Socket Weld Ends, Full & Reduce Bore.

SPECIFICATION

Valve Body Pressure Rating
ASME Class 1500, Max 3705 psig @ 100 F (Carbon Steel)

Temperature Rating
As per ASME B16.34 dependant on Seat Material selection.
Please consult kVC Uk ltd.

Body
Three-piece construction.

Body Bolts & Nuts
ASTM A193 Gr B7 or ASTM A194 Gr 2H
Other Bolts are available according to body material.

Ball and Stem
316 Stainless Steel, Solid Ball as standard.
Other materials available.

Seats
Devlon V, Peek
Other options are available.

Body Seal and Stem Packing
PTFE and Graphite packing as standard.
Other packings are available.

Operation
Valves are supplied with Lever operator.
Locking device or pneumatic and electric actuated.
Option are available.

Seat / Seal Leakage
Conform to API 598.
All valves are tested to bubble-tight standards.

Design Specification
ASME 16.34
BS 5351 / BS EN 17292
Socket Weld Ends to ASME B16.11
NACE MR-01-75 material (where required).
Firesafe to API 607 (where required).
Anti Static Feature.
Special materials are available to customer requirement.
End to end (L) dimensions are to manufacturer standard.

Note: Dimensions are for information only.
              Order Specific arrangement drawing dimensions will be final.

CLASS 2500#
FLOATING BALL VALVE

Threaded Ends, Full & Reduce Bore.

SPECIFICATION

Valve Body Pressure Rating
ASME Class 2500, Max 6170 psig @ 100 F (Carbon Steel)

Temperature Rating
As per ASME B16.34 dependant on Seat Material selection.
Please consult kVC Uk ltd.

Body
Three-piece construction.

Body Bolts & Nuts
ASTM A193 Gr B7 or ASTM A194 Gr 2H
Other Bolts are available according to body material.

Ball and Stem
316 Stainless Steel, Solid Ball as standard.
Other materials available.

Seats
Peek seats.

Body Seal and Stem Packing
O-Ring Seal, PTFE and Graphite as Standard.
Other Packings are available.

Operation
Valves are supplied with Lever operator.
Locking device or pneumatic and electric actuated.
Option are available.

Seat / Seal Leakage
Conform to API 598.
All valves are tested to bubble-tight standards.

Design Specification
ASME 16.34
BS 5351 / BS EN 17292
Threaded Ends to ASME B1.20.1
NACE MR-01-75 material (where required).
Firesafe to API 607 (where required).
Anti Static Feature.
Special materials are available to customer requirement.
End to end (L) dimensions are to manufacturer standard.

Note: Dimensions are for information only.
              Order Specific arrangement drawing dimensions will be final.

CLASS 2500#
FLOATING BALL VALVE

Socket Weld Ends, Full & Reduce Bore.

SPECIFICATION

Valve Body Pressure Rating
ASME Class 2500, Max 6170 psig @ 100 F (Carbon Steel)

Temperature Rating
As per ASME B16.34 dependant on Seat Material selection.
Please consult kVC Uk ltd.

Body
Three-piece construction.

Body Bolts & Nuts
ASTM A193 Gr B7 or ASTM A194 Gr 2H
Other Bolts are available according to body material.

Ball and Stem
316 Stainless Steel, Solid Ball as standard.
Other materials available.

Seats
Peek seats.

Body Seal and Stem Packing
O-Ring Seal, PTFE and Graphite as Standard.
Other Packings are available.

Operation
Valves are supplied with Lever operator.
Locking device or pneumatic and electric actuated.
Option are available.

Seat / Seal Leakage
Conform to API 598.
All valves are tested to bubble-tight standards.

Design Specification
ASME 16.34
BS 5351 / BS EN 17292
Threaded Ends to ASME B1.20.1
NACE MR-01-75 material (where required).
Firesafe to API 607 (where required).
Anti Static Feature.
Special materials are available to customer requirement.
End to end (L) dimensions are to manufacturer standard.

Note: Dimensions are for information only.
              Order Specific arrangement drawing dimensions will be final.